Fabri-Valve XS150-ULV

The XS150-ULV provides bubble-tight bi-directional shutoff with the added abrasion protection of the urethane liners. The temperature limitation of the standard liners is 170ºF (77°C). The perimeter seal technology allows for injectable packing adjustments on-line.

The advantages of the design include:

• Zero discharge
• Zero leakage
• Liner is not used for sealing
• One-piece perimeter seal provides bubble-tight, bi-directional shutoff
• Injectable packing design allows adjustments to be made under pressure

View the ULV Brochure or Installation & Maintenance Manual

Fabri-Valve C45

Fabri-Valve knife gate valves are used worldwide in erosive applications such as pulverizer isolation and coal burner isolation.

The Fabri-Valve Figure C45 design meets all NFPA 85 requirements/specifications for Dusttight Valves and Barrier Valves for pulverized fuel systems, including the quick closing requirement. Unrestricted full-port flow and ANSI 125/I50 lb. flange bolting are standard with custom ID’s and bolt patterns available. For additional abrasion resistance and extended service life, the following options are available:

• Hard-facing of Integral seats
• Field-replaceable, hard-faced seats
• Hardened gates
• Deflection (wear) cones

Fabri-Valves can be fitted with a choice of actuation packages including:

• Manual rising stem
• Manual non-rising stem
• Chain wheel
• Nut Drive
• Pneumatic
• Electrical
• Bevel gear

View the C45 Brochure or Installation & Maintenance Manual

Fabri CF33/133

Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service in heavy slurries. Specially designed body liners and constant contact seats minimize seat stress ensuring exceptional service life. Seats are self gasketing and are compatible with raised or flat faced, lined or unlined flanges. Figures C/F133 have a containment bonnet attached to the bottom flange to capture any discharge during cycling.

 View the CF33/133 Brochure or Installation & Maintenance Manual

Fabri-Valve C67

The Fabri-Valve Figure C67 provides bubble-tight, bi-directional shutoff with its patented perimeter seal.
The seal is retained in the valve body by its trapezoidal shape. A relief has been cast into the valve body. The relief greatly reduces seal compression set; the shape of the seal eliminates leakage due to seat rollover, and seat pullout.

Maximum temperature rating is 400°F (214°C).

The C67 can be equipped with several options to extend the life:

• Hardened steel gates
• Ceramic-lined gates
• Chest liners prevent solids entrapment in chest area and also provide increased gate support.

View the C67 Brochure or Installation & Maintenance Manual

Dia-Flo Straightway Valves

Applications: kaolin, titanium dioxide and PCC Unlined or lined (soft rubber, neoprene, plastic)

Designed specifically for slurry, abrasive and corrosive applications, Dia-Flo Straightway Valves offer a streamlined fluid passage which prevents particles from becoming entrapped and obstructing valve operation.

• Available lined or unlined
• Bonnet parts are completely isolated
• Bubble tight shut-off

View the Dia-Flo Selection Guide