Printable Version of this Page
  • Your Location » Bleaching

Bleaching

Markets

The bleach process has seen dramatic changes over the last several years. The EPA’s “Cluster Rules” demand changes in technologies, chemicals, and valve performance. Our valves meet the rigorous standards and requirements of the modern bleach plant. From our TFE/PFA lined products in chlorine dioxide generation to high alloy specialty knife gates, we meet the challenges. The latest improvement? The introduction of the Fabri-Valve “Energized Packing.” This unique packing arrangement provides packing seals that last for eight times more cycles, with one-third the adjustment requirements of conventional knife gate packing.

Cam-TiteCam-Tite Carbon Steel ST3-SL4-CLV

Applications: chlorine gas containment, methanol, ozone and oxygen applications where VOCs may be explosive

Proven to withstand harsh chlorine service, the Cam-Tite offers absolute shutoff with no stem seal leakage, and a patented ball design for zero seat leakage.

  • A positive vent in valve body provides safety relief
  • Fire safe RTFE seat
  • Graphite stem seal and gasket

View the Cam-Tite Catalog 

 


 

Dia-FloDia-Flo 2529-TM Diaphragm Valve

Applications: chlorine gas containment, extraction, hypochlorite, sulfuric acid, sodium chlorate with solids, ozone and oxygen applications where VOCs may be explosive, and sulfur dioxide

The Dia-Flo Tefzel-lined Weir Diaphragm Valve features bubble tight shut-off from 0.1 micron to 200 psi. An optional sealed bonnet offers secondary containment in case of diaphragm failure, preventing the process media from entering the atmosphere.

  • Resistant to chemical attack and corrosion
  • Adjustable travel stop
  • Protective stem cap

View the Dia-Flo Selection Guide


Fabri-Valve F39Fabri-Valve F39 Fabricated Slide Gate Valve

Applications: isolation of pumps and equipment, high density storage, and tower isolation

Fabricated versatility provides the ability to use the best material for each application. The F39 can be built in Hastelloy or Titanium for positive closure on the severe corrosives found in bleach plant applications.

  • Optional flush and cleanout ports allow wash-out of de-watered stock
  • Replaceable seats for positive shut-off
  • Diamond port for throttling

View the F39 Brochure and Installation & Maintenance Manual 

 

 

 

 


Fabri-Valve C67Fabri-Valve C67

Applications: bleach stock lines, tower, equipment and pump isolation

Performance with an intense emphasis on rigorous standards. That’s what you’ll achieve with the proven bubbletight, bi-directional action of the C67. Fabri-Valves’ “Energized Packing” provides sealing performance well beyond traditional knife gate valves. It’s the ideal valve for bleached stock lines throughout your bleach plant.

  • Optional AFLAS seats for corrosive areas
  • Optional White Viton seats
  • Available in 317L, 254 SMO, and other high alloys

View the C67 Brochure and Installation & Maintenance Manual 


Find Sales & Service