Dia-Flo Weir Diaphragm Valve

Offering corrosion resistant coatings and diaphragms, plus a wide range of linings, the Dia-Flo valves provide an excellent, yet economical, barrier to chemical attack and corrosion.

• Virtual absence of cavities makes it the ideal valve for slurry applications
• Bubble tight shut-off down to 0.1 microns
• All working parts are isolated from the process fluid

View the Dia-Flo Selection Guide

Fabri-Valve C67

The Fabri-Valve Figure C67 provides bubble-tight, bi-directional shutoff with its patented perimeter seal. The seal is retained in the valve body by its trapezoidal shape. A relief has been cast into the valve body. The relief greatly reduces seal compression set; the shape of the seal eliminates leakage due to seat rollover, and seat pullout.

Maximum temperature rating is 400°F (214°C).

The C67 can be equipped with several options to extend the life:

• Hardened steel gates
• Ceramic-lined gates
• Chest liners prevent solids entrapment in chest area and also provide increased gate support.

View the C67 Brochure or Installation & Maintenance Manual

Fabri-Valve C37R/S Knife Gate Valve

Applications: stock lines, equipment and pump isolation, and filtrate

The Fabri-Valve C37 is the workhorse of the pulp mill. This valve meets or exceeds the MSS and TAPPI standards for knife gate valves. Plus, the open seat area on the C37 allows for use in higher consistency stock where other manufacturer’s knife gate valves fall short.

• Metal, D-Ring, or replaceable seat options
• All stainless steel or stainless body with carbon/ductile topworks
• Backing rings for reverse flow applications

 View the C37 Brochure or Installation & Maintenance Manual