This site uses cookies to enable basic functionality, provide an enhanced user experience and collect performance data. Read more about this site's cookies levels and Privacy Policy.

To experience the full functionality of the site, click the Performance button. Closing this banner will set system cookies only, which may result in some pages not functioning as expected.
x
Products

Fabri-Valve CF134 Bonneted Knife Gate Valve

Fabri-Valve CF134 Bonneted Knife Gate Valve

Product Description

The Fabri-Valve C/F134R/S bonneted knife gate valve is used in difficult services to provide high cycle stem sealing and superior stem seal containment. The cylindrical packing around the stem provides a tighter, easier to maintain stem seal. Bonneted valves are available with an optional metal backseat on the stem. In addition, the valve can be supplied with a gate wiper and purge ports in the bonnet to minimize movement of material into the bonnet. If a non-pressurized dirt shield is required, specify a Figure 37 w/dirt shroud. Standard body materials include Figure 304, 316 and 317L stainless steel. Special alloys such as 254 SMO®, Hastelloy C are also available.

Download Literature


Specifications

Size Range
1.5”- 96”
Pressure Rating
1.5”-24” 150 psi (10.3 bar) CWP
Consult Factory for higher pressures.
Bonnet
150 psi (10.3 bar) CWP standard. If a Non-pressurized dirt shield is required, use a Figure 37 w/dirt shroud.
Temperature Rating
1.5”-48” 450°F (232°C)
Designs available to 2000°F, Consult Factory.
Service temperatures above 400°F (204°C) require high temperature fasteners. Specify service temperature on paperwork.
Flanges Drilling ANSI 125/150

Fabri-Valve CF134 Bonneted Knife Gate Valve

Fabri-Valve CF134 Bonneted Knife Gate Valve

Product Description

The Fabri-Valve C/F134R/S bonneted knife gate valve is used in difficult services to provide high cycle stem sealing and superior stem seal containment. The cylindrical packing around the stem provides a tighter, easier to maintain stem seal. Bonneted valves are available with an optional metal backseat on the stem. In addition, the valve can be supplied with a gate wiper and purge ports in the bonnet to minimize movement of material into the bonnet. If a non-pressurized dirt shield is required, specify a Figure 37 w/dirt shroud. Standard body materials include Figure 304, 316 and 317L stainless steel. Special alloys such as 254 SMO®, Hastelloy C are also available.

Download Literature

Specifications

Size Range
1.5”- 96”
Pressure Rating
1.5”-24” 150 psi (10.3 bar) CWP
Consult Factory for higher pressures.
Bonnet
150 psi (10.3 bar) CWP standard. If a Non-pressurized dirt shield is required, use a Figure 37 w/dirt shroud.
Temperature Rating
1.5”-48” 450°F (232°C)
Designs available to 2000°F, Consult Factory.
Service temperatures above 400°F (204°C) require high temperature fasteners. Specify service temperature on paperwork.
Flanges Drilling ANSI 125/150

Object reference not set to an instance of an object.

Related Products